Hello, I have an umbrella manufacturing business (pre-production) and I have discovered I can cut my fabric and get a nice clean cut with my Atomstack laser. Problem is the cutting area I would need to have is approx. 12'X6'. I am looking for a supplier that can furnish the rails, belts etc.. I need to build my cutting frame.
Is there a supplier you know that I can purchase the items needed?
Thank you in advance!
Building/Modifying enlarging a Diode Laser cutting area
-
LAHobbyGuy
- Laser Yoda
- Reactions:
- Posts: 2962
- Joined: Mon Jun 28, 2021 10:17 am
- Location: New Orleans, Lousiana
- Your Specific Hobby: Laser Engraver
- Contact:
Re: Building/Modifying enlarging a Diode Laser cutting area
Everything you need can be sourced on Amazon. It's been 6 years since I built it, so don't ask for the exact links 
Rails can be joined together (I bought 4' sections), belts come in rolls up to 50', gang wiring comes in boxes with multiple colors. When I built my 4' x 8', everything came from Amazon. You will need supports for where the rails join (not really, but I used 3D printed supports anyway), and it would have to be mounted to a spoil board or table.
Rails can be joined together (I bought 4' sections), belts come in rolls up to 50', gang wiring comes in boxes with multiple colors. When I built my 4' x 8', everything came from Amazon. You will need supports for where the rails join (not really, but I used 3D printed supports anyway), and it would have to be mounted to a spoil board or table.inspire.. create.. learn.. teach.. help someone today... Subscribe to my YouTube Channel, The Louisiana Hobby Guy!
PLEASE DO NOT PM ME OR EMAIL THE ADMIN! THIS FORUM WAS DESIGNED TO ANSWER YOUR QUESTIONS!
New Here? Main Forums --> Start Here --> Everyone Please Read
PLEASE DO NOT PM ME OR EMAIL THE ADMIN! THIS FORUM WAS DESIGNED TO ANSWER YOUR QUESTIONS!
New Here? Main Forums --> Start Here --> Everyone Please Read