sealing cork coasters

This forum is for forum software questions and introductions.
User avatar
bgreat
Jr Member
Jr Member
Reactions:
Posts: 35
Joined: Sun Jul 17, 2022 12:43 pm
Location: Inland Empire, CA

Re: sealing cork coasters

Post by bgreat »

Garysfirstlaser wrote: Sun Oct 27, 2024 9:24 am Maybe I didn't say this correctly, I have watched Rich's video a dozen times and after soaking the cork in water will that set the charred cork where it doesn't rub off or stink yet. I figure the bigger size would be used to set a hot dish (say out of the oven) on. So, I wondered if there would be a spray or brush on coating to seal the trivet that would also be heat resistant.
Thanks
Gary
I think there may also be a disconnect on treating the cork. Rich says “… just mist them down with water … causes the soot to stain into the cork… not get them soaking wer… let it dry….“

If you soak the cork, the staining is not going to happen as the soot stain will not draw into the cork.

Also, “low and slow”. You want a deep heat and color, not a quick burn that leaves just a char that brushes off.
This is Bill. I have a Longer Ray5, 5W and 10W laser options. I am new to this hobby, but have >20 years FDM experience.
Garysfirstlaser
Laserologist
Laserologist
Reactions:
Posts: 218
Joined: Sun Apr 24, 2022 8:37 pm
Location: Illinois

Re: sealing cork coasters

Post by Garysfirstlaser »

bgreat wrote: Sat Nov 02, 2024 6:39 am
Garysfirstlaser wrote: Sun Oct 27, 2024 9:24 am Maybe I didn't say this correctly, I have watched Rich's video a dozen times and after soaking the cork in water will that set the charred cork where it doesn't rub off or stink yet. I figure the bigger size would be used to set a hot dish (say out of the oven) on. So, I wondered if there would be a spray or brush on coating to seal the trivet that would also be heat resistant.
Thanks
Gary
I think there may also be a disconnect on treating the cork. Rich says “… just mist them down with water … causes the soot to stain into the cork… not get them soaking wer… let it dry….“

If you soak the cork, the staining is not going to happen as the soot stain will not draw into the cork.

Also, “low and slow”. You want a deep heat and color, not a quick burn that leaves just a char that brushes off.
Thanks, as they say practice makes perfect. I think I read too much into the video.
First Name: Gary
I use an Atomstack A5 M40 40W
I have found I learn something almost every day on this sight.
MikeH
Laser Master
Laser Master
Reactions:
Posts: 112
Joined: Thu Mar 31, 2022 4:55 pm
Location: Northern WI

Re: sealing cork coasters

Post by MikeH »

I was thinking more for drinks, not anything hot.
Hi, my name is Mike.

I am using NEJE 3 Max laser and a Longmill MK2 for CNC woodworking. The learning has been fun and frustrating, sometimes at the same
time.
User avatar
LAHobbyGuy
Laser Yoda
Laser Yoda
Reactions:
Posts: 2962
Joined: Mon Jun 28, 2021 10:17 am
Location: New Orleans, Lousiana
Your Specific Hobby: Laser Engraver
Contact:

Re: sealing cork coasters

Post by LAHobbyGuy »

Garysfirstlaser wrote: Sat Nov 02, 2024 5:52 am Thanks Rich,
Does the burnt cork smell go away after time. Also, how long do you rinse the second time?
No Gary, it takes a LONG time. However, instead of using a spritz of plain water, mix in a little white vinegar to the bottle, maybe a teaspoon or so to 16 oz of water, and it'll cause the soot to stain the cork, and remove the smell. After the first treatment dries, I usually wash them with soap and water the next day.
inspire.. create.. learn.. teach.. help someone today... Subscribe to my YouTube Channel, The Louisiana Hobby Guy!
PLEASE DO NOT PM ME OR EMAIL THE ADMIN! THIS FORUM WAS DESIGNED TO ANSWER YOUR QUESTIONS!
➡️ New Here? Main Forums --> Start Here --> Everyone Please Read
Garysfirstlaser
Laserologist
Laserologist
Reactions:
Posts: 218
Joined: Sun Apr 24, 2022 8:37 pm
Location: Illinois

Re: sealing cork coasters

Post by Garysfirstlaser »

THANK YOU, Rich,
My wife has a very sensitive nose so that will help a lot.
I greatly appreciate and respect your opinions and views.
You are (in my opinion, the best.) SHHHHH, don't tell Mike. LOL
Thanks again Rich.
Gary
First Name: Gary
I use an Atomstack A5 M40 40W
I have found I learn something almost every day on this sight.
User avatar
KnightRid
Global Moderator
Global Moderator
Reactions:
Posts: 2155
Joined: Thu Aug 18, 2022 4:19 pm
Location: Dallastown, PA

Re: sealing cork coasters

Post by KnightRid »

Garysfirstlaser wrote: Sat Nov 09, 2024 6:56 am THANK YOU, Rich,
My wife has a very sensitive nose so that will help a lot.
I greatly appreciate and respect your opinions and views.
You are (in my opinion, the best.) SHHHHH, don't tell Mike. LOL
Thanks again Rich.
Gary
LOL I already know he's the best :)
Hi my name is Mike and I use a Roly Automation LaserMATIC10 and a Creality Falcon 10w diode laser.
Hobby Forums --> Start Here -- Everyone Please Read
Post Reply
3-7 Day Fast Delivery to US from Banggood US Warehouse