10W-20W-30W Comprehensive Diode library is now available!

[KnightRid]

ONLY FOR LIGHTBURN

https://engraveandcutfiles.com/product/ ... ibrary-v1/

Thanx Rich!!!!!!!

I forgot to add if you join Rich's patreon you can get discounts from 80% - 100% on his files!!! - https://www.patreon.com/lahobbyguy/

[TW1]

Is this a general starting point laser library or specific to a Roly Automation diode laser?

[KnightRid]

Is this a general starting point laser library or specific to a Roly Automation diode laser?

General starting point. Every laser will still need some tests but this gives you a starting point and maybe lucky enough that it just works for your laser right out of the gate too!

[TW1]

Cool!

[vizer]

I would like to know if this material library is suitable for sculpfun 22W laser module?

[Bimmers]

Hello Rich Ty for your kind demonstrations I enjoy watching you, I have a question. I have falcon 2 laser 40W Diode and i am new this system trying to learn.
When it shows 10w 20w 30w but still i can download and change the number slowly to adjust correct? Theory everything is same just the numbers needs to be adjusted correct for 40w

[KnightRid]

Hello Rich Ty for your kind demonstrations I enjoy watching you, I have a question. I have falcon 2 laser 40W Diode and i am new this system trying to learn.
When it shows 10w 20w 30w but still i can download and change the number slowly to adjust correct? Theory everything is same just the numbers needs to be adjusted correct for 40w

Yes. You could also download one from here - viewtopic.php?t=35&start=10 - to get close also. I see there is one for the Falcon that has a 40w in it.

[lionella1013]

I am using a Algo laser 10W diode via lightburn. Do you have a material Library for it. Thanks

[waterman]

is there a 70 w library? for atomstack a70 or ikier K1

[JARivera]

Is there a specific library for 24-watt lasers? I have an ATOMSTACK A20 ACER PRO 24-watts and have not been able to find one anywhere. A CUT & ENGRAVE Test Grid File will help a lot. The rest I could do. Any help will be appreciated.